home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / amiga / hardware-part1 / 3228 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  1012 b 
  1. Path: ubvms.cc.buffalo.edu!v068qh5p
  2. From: v068qh5p@ubvms.cc.buffalo.edu (Piotr J Meszynski)
  3. Newsgroups: comp.sys.amiga.hardware
  4. Subject: How to remove heat sink??
  5. Date: 1 Feb 1996 01:43 EST
  6. Organization: University at Buffalo
  7. Distribution: world
  8. Message-ID: <1FEB199601431650@ubvms.cc.buffalo.edu>
  9. NNTP-Posting-Host: ubvmsb.cc.buffalo.edu
  10. News-Software: VAX/VMS VNEWS 1.41    
  11.  
  12.  
  13. Hello, I just purchased used a3640 with the "normal" heat sink which will not
  14. fit in my A3000. I tried to lift the old heat sink with knife but it does not
  15. work. What is the safest way to remove it? Also, what should be tke jumper
  16. settings on my A3000 and a3640 to make them work properly together?
  17. Thanks for help.
  18. Sincerely,
  19.  
  20.               **********************************************
  21.               *              Piotr J Meszynski             *
  22.               *               SUNY at Buffalo              *
  23.               *       v068qh5p@ubvms.cc.buffalo.edu        *
  24.               **********************************************
  25.